PCI Serial Port Cards

PCI serial cards are ideal for industrial applications including automotive diagnostics, HVAC, point-of-sale, court reporting, security and SCADA.

BB-DSLP-PCIE-100

Model DSLP-PCIE-100, low-profile RS-232 serial PCI Express Card, meets PCI Express Base Specifications V1.1. It can be installed in virtually any available PC system and is compatible with all major operating systems. Users do not need to set jumpers to configure I/O addresses and IRQ locations. The board also supports 5VDC or 12VDC of power from each serial port pins 1, 4, 8 or 9. This can be configured via jumpers on the board. If this power is not required, then normal control signals are available. The default configuration is with the jumpers set to disable the power on these pins.
PCI-1602UP

These RS-232/422/485 PCI communication cards are compatible with the PCI 2.2 bus specification for universal connectivity and low-profile PCI cards. The PCI-1604UP provides two independent RS-232 ports, while the PCI-1602UP has two RS-232/422/485 ports. To improve system performance, all cards allow transmission rates up to 921.6 kbps. To increase reliability, the cards offer EFT protection, protecting your system from abrupt high voltages up to 2,500 VDC. High-performance OXuPC1952 and OXuPC1954 UARTs with 128-byte FIFO, reduces the CPU load, making the cards especially suitable for multitasking environments. The cards follow the Low Profile PCI MD1 standard. This standard has the same protocol and electronic definition as standard PCI, but the low-profile PCI standard is smaller. Thus, the cards are suitable for embedded systems, and size-constrained environments. Moreover, all cards are equipped with an universal PCI connector, which allows support for traditional systems with 5 V ...
PCI-1604L

The PCI-1604L is an 2-port RS-232 and compatible with the PCI 2.2 bus specification, The card provides 1 KV EFT protection , 8KV ESD protection and have many functions such as high transmission speed of 921.6 kbps; The card can work under a tough environment with -20 ~ 60°C operating temperature. PCI-1604L is an economical communication card for users who need to control several RS-232 devices.
PCI-1671UP

The PCI-1671UP IEEE-488 interface converts any PCI bus personal computer into an instrumentation control and data acquisition system. Connect up to 14 instruments using standard IEEE-488 cables such as the PCL-10488-2, 2 meter IEEE-488 interface cable. The PCI-1671UP transfers data over the GPIB at rates in excess of 1.5 million bytes per second using the maximum IEEE-488 specification cable length (2 meters times the # of devices). A 1,024-word FIFO buffer and the advanced REP-INSW ISR data transfer method provide the horsepower required to then transfer the data between the GPIB board and the host computer. The high-speed state machine also provides byte-to-word packing and unpacking, and because words carry twice the information that bytes do, packed data requires fewer bus cycles to transfer the same GPIB information.The PCI-1671UP adheres to ANSI/IEEE Standard 488-1978. Often referred to as the IEEE-488.2 bus, GPIB bus or HP-IB bus, the GPIB (General Purpose Interface Bus) is a st...
PCI-1680U

PCI-1680U is a special purpose communication card that offers the connectivity of the Controller Area Network (CAN) to your PC. With its built-in CAN controllers, the PCI-1680U provides bus arbitration and error detection with an automatic transmission repeat function. This drastically reduces the chance of data loss and ensures system reliability. The on-board CAN controllers are located at different positions in the memory, and you can run both CAN controllers independently at the same time. Besides, PCI-1680U has a universal PCI connector, which is compatible with both new 3.3 V signaling systems and traditional 5 V signaling systems. With high-compatibility, the PCI-1680U can be used in diverse systems.
PCIE-1680

The PCIE-1680 is a special purpose communication card that offers connectivity to Controller Area Networks (CAN) on your PC. With its built-in CAN controllers, the PCIE-1680 provides bus arbitration and error detection with an automatic transmission repetition. This drastically reduces the chance of data loss and ensures system reliability.You can run both CAN controllers independently at the same time. The PCIE-1680 operates at baud rates up to 1 Mbps.

PCI Serial Port Cards

BB-DSLP-PCIE-100

PCI-1602UP

PCI-1604L

PCI-1671UP

PCI-1680U

PCIE-1680