Wireless Mesh Sensors and Accessory Cables

Sensors and Accessory Cables for Wzzard Smart Mesh Sensing Networks

BB-HS-104T2505402

The 250mV/g accelerometer is selected for use with Advantech Wzzard Wireless Sensing Solutions, data collectors and online systems using 2-wire constant current drive. The transmitter vibration/temperature sensor is built to high industrial specifications and rigorous ISO quality standards.
BB-JC10F50-V

Clamp-on split-core current transducer, Model JC10F50-V, is designed for energy management with a convenient connection to electronic sub-metering. It may also be applied for current measurement in a system of distributed power line carriers (PLCs) or remote controls such as SCADA software for automation and supervision. Other applications include security and condition monitoring, load monitoring, protection systems, and predictive maintenance of conveyors, pumps, HVAC motors and more.
BB-JC24S250-V

This split-core current transducer, Model JC24S250-V, is designed for energy management with a convenient connection to electronic sub-metering. It may also be applied for current measurement in a system of distributed power line carriers (PLCs) or remote controls such as SCADA software for automation and supervision. Other applications include security and condition monitoring, load monitoring, protection systems, and predictive maintenance of conveyors, pumps, HVAC motors and more.
BB-JC36S500-V

This split-core current transducer, Model JC36S500-V, is designed for energy management with a convenient connection to electronic sub-metering. It may also be applied for current measurement in a system of distributed power line carriers (PLCs) or remote controls such as SCADA software for automation and supervision. Other applications include security and condition monitoring, load monitoring, protection systems, and predictive maintenance of conveyors, pumps, HVAC motors and more.
BB-LP252-2R2-1D

Sensor, Accelerometer, 4-20mA Output, Top Exit
BB-MH112-1A

This magnetic mounting base is an optional accessory for Model BB-HS-104T2505402, ultra-low-power temperature/vibration sensor. The pole-piece pot magnet provides a secure semi-permanent point-of-connection to a curved surface and has an operating temperature range up to 120 °C (248 °F).
BB-T9602-3-A-1-G2

PMD analog output, 3V, OEM, 1m (3.28 ft)
BB-WCD-LSSCBL

Wzzard™ light sensor, BB-WCD-LSSCBL, makes it easy to get stack light data. Stick the sensor strip on your stack light. Cut away any sensors you don’t need. Plug the cable into a wireless Wzzard stack light sensing node to capture and network-enable data odes, gateways, kits sold separately.
BB-WCD-TM2M

Thermistor Cable
BB-WCHCBL

The Breakout Cable provides a 10K thermistor along with easy connections to other sensors. Plug in the BB-WCHMS door sensor. Wire any analog sensor to the stripped and tinned wires.
BB-WCHMS

The flush mount sensor saves space while providing a non-contact way to indicate door open/closed status. The sensor works side, top, or bottom mounted as long as the two pieces are within 0.75" of each other with the door closed.
BB-WSCAM12-6

Model BB-WSCAM12-6 is a wire harness cable with 8 pins, M12 Micro-Change connector. It is rugged, compact and sealed for sensor/actuator connectivity in industrial control applications. Length: 1.8 m (6 ft)
BB-WSDCBL-ACL-2

Model BB-WSDCBL-ACL-2 accessory/replacement cable converts AC to DC. M12, 2-meter cable connects Wzzard industrial node# BB-WSD2M3101P2K) to accelerometer sensor# BB-HS-104T2505402 and provides signal conditioning for the sensor. One cable is included w/ Wzzard Condition Based Monitoring Kit.
BB-WTJ-10-36-TT

BB-WTJ-10-36-TT thermocouple mounts to a variety of surfaces. Use for surface temperature measurement applications where fixed mounting is possible.
BB-WTJ-10-60

THERMOCOUPLE, JTYPE, #10 MOUNTING HOLE

Wireless Mesh Sensors and Accessory Cables

The 250mV/g accelerometer is selected for use with Advantech Wzzard Wireless Sensing Solutions, data collectors and online systems using 2-wire constant current drive. The transmitter vibration/temperature sensor is built to high industrial specifications and rigorous ISO quality standards.

Sensor, Accelerometer, 4-20mA Output, Top Exit

This magnetic mounting base is an optional accessory for Model BB-HS-104T2505402, ultra-low-power temperature/vibration sensor. The pole-piece pot magnet provides a secure semi-permanent point-of-connection to a curved surface and has an operating temperature range up to 120 °C (248 °F).

PMD analog output, 3V, OEM, 1m (3.28 ft)

Wzzard™ light sensor, BB-WCD-LSSCBL, makes it easy to get stack light data. Stick the sensor strip on your stack light. Cut away any sensors you don’t need. Plug the cable into a wireless Wzzard stack light sensing node to capture and network-enable data odes, gateways, kits sold separately.

Thermistor Cable

The Breakout Cable provides a 10K thermistor along with easy connections to other sensors. Plug in the BB-WCHMS door sensor. Wire any analog sensor to the stripped and tinned wires.

The flush mount sensor saves space while providing a non-contact way to indicate door open/closed status. The sensor works side, top, or bottom mounted as long as the two pieces are within 0.75" of each other with the door closed.

Model BB-WSCAM12-6 is a wire harness cable with 8 pins, M12 Micro-Change connector. It is rugged, compact and sealed for sensor/actuator connectivity in industrial control applications. Length: 1.8 m (6 ft)

Model BB-WSDCBL-ACL-2 accessory/replacement cable converts AC to DC. M12, 2-meter cable connects Wzzard industrial node# BB-WSD2M3101P2K) to accelerometer sensor# BB-HS-104T2505402 and provides signal conditioning for the sensor. One cable is included w/ Wzzard Condition Based Monitoring Kit.

BB-WTJ-10-36-TT thermocouple mounts to a variety of surfaces. Use for surface temperature measurement applications where fixed mounting is possible.

THERMOCOUPLE, JTYPE, #10 MOUNTING HOLE